clc1160

[br21]

hi!
I've got such problem:
in my canon clc1160 when I'm printing grayscale I've got a problem... when I've got 100% black it's almost ok, but when I've got i.e. 20, 30 or 40% grayscale I've got not black but red tint... where to look for solution?
thanx for help!

[prada]

I have had a problem like this in the past, it was down to corrupt reader controller. Try cleaning optics/white plate, do the CCD adjust. make sure that the primary/grid are clean and at correct height. Do the auto-gradation. If this fails, clear the reader controller memory and repeat above.

Hope this helps.