ADF JAMS ADVC7050

[lago]

Hi thank you all in advance, have a advc7050 when making copies on ADF over 200 pages when gets to page 51 stops/jams and when cleared it does all the same all over again never passes page 51 any support ideas..
Thank you
Lago

[dan7777]

Re: ADF JAMS ADVC7050

Hi thank you all in advance, have a advc7050 when making copies on ADF over 200 pages when gets to page 51 stops/jams and when cleared it does all the same all over again never passes page 51 any support ideas..
Thank you
Lago

When you go to the jam log and touch the jam it shows you where it jams. You can swap several jam boards for troubleshooting. PCB 5 seems to be the main problem for me. If I have a lot of jams there I put a new board in (not too expensive). I have several customers who scan massive amounts of paper and the old paper makes for some dirty feeders. This style feeder goes on a lot of copiers and I can take more apart as the years go by. Intermittent jams like yours are hard to fix.

[teckat]

Re: ADF JAMS ADVC7050

Hi thank you all in advance, have a advc7050 when making copies on ADF over 200 pages when gets to page 51 stops/jams and when cleared it does all the same all over again never passes page 51 any support ideas..
Thank you
Lago

==============================
Jam codes or messages ??


Settings / Registration > Management Settings > Device Management > Limited Functions Mode