[Jamming] Can not clear paper jam unless restart IR5055

[TCA TECH]

Hi All,
I have a ir5055 that after a jam, fuser area the machine just will not reset unless i turn on and off.

Any suggestions other than rear fuser wiring loom and plug ;-(

yes old and lots of copies, have cleaned and replaced sensors in the past, suspect electrical connection maybe

[copier tech]

Re: Can not clear paper jam unless restart IR5055

That fault is usually caused by a tiny piece of paper trapped in the fuser connector block in the rear of the fuser draw unit.

[livancicm]

Re: Can not clear paper jam unless restart IR5055

check SW7

[TCA TECH]

Re: Can not clear paper jam unless restart IR5055

No Paper , but will replace SW7 as a just in case. thanks