If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm working on a Canon IR C3100 Copy Machine. It's giving me an error code E602-001(no display). The book says it's a Hard Drive problem. Does anybody know where I can get a new or used hard drive for this machine?
It is a standard 3.5" desktop pc hard drive, however once you replace the drive you will need to load the firmware back onto the drive, this firmware is only available to Canon service engineers.
Time to upgrade your old IRC3100 !
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
Comment