These fusers are so mixed up with pin outs and number of connectors. Right now I have two fusers that have two purple wire connectors but the 120v has 3-pin and 4-pin version. I am re-sleeving these so I know my way around them. One machine just went E0000-0001. Tried resetting the code with clear/ERR-OK. It would not reset so I believe the ceramic heater is shot. Has anyone tried changing around the 120v connector heads?
-
-
Re: IR 3025 and 3245 fusers
Someone posted a while ago about that. I have never tried it but another person said they had heard it possible. I don't remember what models or how you would find that post here. I just use the fixing films they call for and I was surprised someone asked the question. I did a search on fixing films and "Can an IR2270 fuser be converted to a IR4570" came up. Don't know if it will work? -
Re: IR 3025 and 3245 fusers
Personally I wouldn't bother, they are different for a reason, why risk blowing your power supply or DC controller!Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
-
Re: IR 3025 and 3245 fusers
Warning_Alert =:O
Not responsible for actions u take from this link.
:-! :-! :-!
http://www.copytechnet.com/forums/ca...tml#post506881**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment
Comment