I have an IRADV2020i which will not boot.
You get the sperm line going 1/4 of the way and the paper trays engage but then it re-boots (the line dissapears and starts again).
I cannot get into service mode, or either of the boot modes (holding down power button then switching on or holding down 2 & 4 and switching on). I don't know if I can get into download mode (2&8)
I am leaning towards either power supply had lost the 24v from it (HDD powers up and LED's turn on and control panel gets power so we have 5v & 12v)
or the firmware has gone!! any ideas guys. If it is firmware has anyone got the firmware for the 2020i I can use the factory default firmware (if anyone has it) and upgrade via the service mode after to the latest if needs be.
The Main controller and DC controller both get power as they light up with LED's like it's Christmas. All connectors taken out & re-seated. The fans work.
Thanks in advance
You get the sperm line going 1/4 of the way and the paper trays engage but then it re-boots (the line dissapears and starts again).
I cannot get into service mode, or either of the boot modes (holding down power button then switching on or holding down 2 & 4 and switching on). I don't know if I can get into download mode (2&8)
I am leaning towards either power supply had lost the 24v from it (HDD powers up and LED's turn on and control panel gets power so we have 5v & 12v)
or the firmware has gone!! any ideas guys. If it is firmware has anyone got the firmware for the 2020i I can use the factory default firmware (if anyone has it) and upgrade via the service mode after to the latest if needs be.
The Main controller and DC controller both get power as they light up with LED's like it's Christmas. All connectors taken out & re-seated. The fans work.
Thanks in advance