IR c3380i wringling paper

[Raymann]

I have a ir c3380i that wrinkels or james up the first page or two then operates fine. It happens after the fuser which has recently been replaced but the wrinkles are the same. more like a typical fan fold but not as bad. Any experence with



this ?// thanks Ray

[techandtrader]

Re: IR c3380i wringling paper

Put new feed rollers in. This has worked for me in one case. Check quality of paper. Humid conditions?
Customer putting already run paper back into the machine.

[tech28]

Re: IR c3380i wringling paper

Open fuser door, see the thin red roller, lubricate it, seen that cause you problem, also, check actuators switchs(the steel cover on them) they come loose also and cause intermittent jams. Good Luck.

[acfife]

Re: IR c3380i wringling paper

Try replacing the orange del roller on fuser door

FC7-2395-000 Orange del roller

FU5-1559-000 Bushes x 2

[Raymann]

Re: IR c3380i wringling paper

If it is part of the fuser assembly then it is brand new. Should I lube with silicon oil? this is an odd request but I am willing..........

[tech28]

Re: IR c3380i wringling paper

Yes, that's the roller I am talking about, lubricate it, the bushings dry up and the roller doesn't turn freely. After a few copies, it kind of frees up and lets paper go thru ok, but after sitting , will cause problems again.