How to register any envelope size

[Vegas10128]

Hello copytech,

Recently came across an issue with having to print wedding envelopes.
The size is not on the canon copier.
Model i have is Canon IR C5180

Im sorry if this is a super silly question or thread to start but any help would be best appreciated!

[teckat]

Re: How to register any envelope size

Hello copytech,

Recently came across an issue with having to print wedding envelopes.
The size is not on the canon copier.
Model i have is Canon IR C5180

Im sorry if this is a super silly question or thread to start but any help would be best appreciated!

---

Run in Bypass Tray-----------------SELECT ON CONTROL PANEL --change the X/Y coordinates on the control panel:1) Choose Stackbypass on the control panel
2) Choose envelope (Press OK key)
3) Choose Irreg. Size
4) Put in x/y coordinants:


or in Print Driver Settings

• Printing on envelopes, do not allow more than 10 envelopes to accumulate in the output tray. Always empty the output tray once 10 envelopes have accumulated.

• You can select from the following paper sizes: <A4>, <A5>, <B5>, <Custom Size>, <COM 10>, <Monarch>, <DL>, <ISO-C5>, <ISO-B5>
• The following envelopes can be loaded into the multi-purpose tray:
  
  
  
  
  
  
  
  

• #10 (U. S.)	4.13 x 9.5 in.	3.73 x 8.95 in.	.2 in.	.275 in.
  #6 3⁄4 (U. S.)	3.65 x 6.5 in.	3.25 x 5.95 in.	.2 in.	.275 in.
  Monarch (U. S.)	3.875 x 7.5 in.	3.475 x 6.95 in.	.2 in.	.275 in.
  C5	162 x 229 mm	152 x 197 mm	5 mm	7 mm 25 mm
  DL	110 x 220 mm	100 x 206 mm	5 mm	7 mm
  Choukei 3 Gou	120 x 235 mm	110 x 221 mm	5 mm	7 mm
  Choukei 4 Gou	90 x 205 mm	80 x 191 mm	5 mm	7 mm

  

Set the service mode as follows:
COPIER>OPTION>BODY>ENV-SPD from 0 to 1; this runs the envelope at plain paper speed when the envelope setting is selected.

0=half speed
1-normal speed

This service mode setting was introduced with System Software v65.01.


The following are the recommended --Run at normal speed if envelopes are sticking--

[Vegas10128]

Re: How to register any envelope size

---

Run in Bypass Tray-----------------SELECT ON CONTROL PANEL --change the X/Y coordinates on the control panel:1) Choose Stackbypass on the control panel
2) Choose envelope (Press OK key)
3) Choose Irreg. Size
4) Put in x/y coordinants:


or in Print Driver Settings

• Printing on envelopes, do not allow more than 10 envelopes to accumulate in the output tray. Always empty the output tray once 10 envelopes have accumulated.

• You can select from the following paper sizes: <A4>, <A5>, <B5>, <Custom Size>, <COM 10>, <Monarch>, <DL>, <ISO-C5>, <ISO-B5>
• The following envelopes can be loaded into the multi-purpose tray:
  
  
  
  
  
  
  
  

• #10 (U. S.)	4.13 x 9.5 in.	3.73 x 8.95 in.	.2 in.	.275 in.
  #6 3⁄4 (U. S.)	3.65 x 6.5 in.	3.25 x 5.95 in.	.2 in.	.275 in.
  Monarch (U. S.)	3.875 x 7.5 in.	3.475 x 6.95 in.	.2 in.	.275 in.
  C5	162 x 229 mm	152 x 197 mm	5 mm	7 mm 25 mm
  DL	110 x 220 mm	100 x 206 mm	5 mm	7 mm
  Choukei 3 Gou	120 x 235 mm	110 x 221 mm	5 mm	7 mm
  Choukei 4 Gou	90 x 205 mm	80 x 191 mm	5 mm	7 mm

  

Set the service mode as follows:
COPIER>OPTION>BODY>ENV-SPD from 0 to 1; this runs the envelope at plain paper speed when the envelope setting is selected.

0=half speed
1-normal speed

This service mode setting was introduced with System Software v65.01.


The following are the recommended --Run at normal speed if envelopes are sticking--

Perfect! Thank you very much,