How to align print heads? (Canon IR C5180)

[Vegas10128]

Hey guys,
After installing an Black (K) laser and putting the co-ordinates into service mode , im having an issue, between color and black printing,
No matter what i print from any of my pc's it looks like alignment is off.

I have tried a re-calibration, but so far no luck.

20170223103448_00001.jpg

[copier tech]

Re: How to align print heads? (Canon IR C5180)

This model does not have "print heads"

Why did you replace the black laser in the first place?

[Vegas10128]

Re: How to align print heads? (Canon IR C5180)

This model does not have "print heads"

Why did you replace the black laser in the first place?

This-copier-has-history-with-lasers-going-out.
I replaced the yellow laser about 1 year and a half ago, did not have issues like this prior.
All laser co-ordinates are recently checked out and appear to be correct for my current issue. im feeling pretty stumped on this problem.

[MunsterTech]

Re: How to align print heads? (Canon IR C5180)

what ever it is, looks like the laser is skewed, did you fit it correctly?