[Error Code] Canon 7260 Error codes

[tekkie]

Canon ir adv 7260 errors every time on power up with 2 error codes
E260 and E227
I have changed the AC power supply and the relay board everything points to the 24 v dc power supply its on order has anyone had same issues

[teckat]

Re: Canon 7260 Error codes

Canon ir adv 7260 errors every time on power up with 2 error codes
E260 and E227
I have changed the AC power supply and the relay board everything points to the 24 v dc power supply its on order has anyone had same issues

---

did u check voltages on 24V DC Power Supply.

what are the e227 / & e260-xxxx sub codes

[Rachid.Akli]

Re: Canon 7260 Error codes

Hi,

Try to measure the 24V input/Output on the relay PCB. If no input, replace the corresponding 24V PCB. If all the 24V inputs are ok, Verify the rlay 24V outputs.

Rachid.