Error showing E-015-60

[Guest]

Hi,

I am facing a problem with IPR c6010,machine is showing a errorE-75-001
i removed ITB then I cleaned lower and upper sensor ,rollers then I put it back ITB then I switchOn the machine machine is ready and printing after a 100 sheet printed machine is going to paper jam ,I removed all jammed papers after that machine is showing Warming Up longtime ,then machine will showing E 015-60

I checked and cleaned the skew motor sensor changed paper type and also the papers but same

Right now machine is down I waiting the valuable reply as soon as possible

[stiftler]

Re: Error showing E-015-60

You might want o initialize the ITB. However your image location/size settings might be affected.

Service mode - copier - Function - Install - Init-ITB