canon ir3235 E804-004

[tekhock]

canon ir3235 e804-004
im try to change main controler fan fm4 and Dc controler board also cant solved this problem....need help pls...tq

[teckat]

Re: canon ir3235 E804-004

canon ir3235 e804-004
im try to change main controler fan fm4 and Dc controler board also cant solved this problem....need help pls...tq

Did you check your DC voltage😱

[luis1984bol]

Re: canon ir3235 E804-004

Did you check your DC voltage😱

Version of firmware? Install V47.01. Clean all the fan also.

[copier tech]

Re: canon ir3235 E804-004

There is no E804-"004" listed in the manual, so try replacing the power supply fan (FM3


E804 Error in power supply cooling fan
0000 Failure in power supply cooling fan (while the fan is not working)
When lock signal is detected for 5 sec while the fan is stopped.
- Disconnect and then connect the connector (J303) on DC controller PCB.
- Replace the power supply cooling fan
- Replace DC controller PCB

0001 Failure in rotation of power supply cooling fan
When lock signal failed to be detected for 5 sec while the fan is driven.
- Disconnect and then connect the connector (J303) on DC controller PCB.
- Replace the power supply cooling fan
- Replace DC controller PCB

[teckat]

Re: canon ir3235 E804-004

June 3, 2009

imageRUNNER 3225 / 3230 / 3235 / 3235i / 3245 / 3245i

What does the Error Code E804-0004 indicate?

The detail or sub code 0004 is not listed in the Service Manual.

Answer :

The description of the code is failure in rotation of FM4 the main controller cooling fan.
When the lock signal failed to be detected for 5 seconds while the fan is driven.

The main controller cooling fan part number is FK2-6691-000.
FM4 plugs into the lower right corner of the Main Controller at connector J2043.

June 3, 2009

[copier tech]

Re: canon ir3235 E804-004

That's odd as my manual states E804 is related to the power supply cooling fan!? (FM3)

June 3, 2009

imageRUNNER 3225 / 3230 / 3235 / 3235i / 3245 / 3245i

What does the Error Code E804-0004 indicate?

The detail or sub code 0004 is not listed in the Service Manual.

Answer :

The description of the code is failure in rotation of FM4 the main controller cooling fan.
When the lock signal failed to be detected for 5 seconds while the fan is driven.

The main controller cooling fan part number is FK2-6691-000.
FM4 plugs into the lower right corner of the Main Controller at connector J2043.

June 3, 2009

[teckat]

Re: canon ir3235 E804-004

That's odd as my manual states E804 is related to the power supply cooling fan!? (FM3)

----------------------------------------------------------------------------------------------------------------------------------------------------

0004 not in manual
see attach pub

[tekhock]

Re: canon ir3235 E804-004

thanks to all suggestion, after change maincond board solve this problem. Anyone know who can repair this board?

[teckat]

Re: canon ir3235 E804-004

thanks to all suggestion, after change maincond board solve this problem. Anyone know who can repair this board?

---

Nation-Wide Repair Service
16151 Foster Street
Overland Park, KS 66085
Customer Service: 1-866-655-8676
Fax Number: 913-387-1815
Technical Support: 1-800-798-1814

---

Hytec Dealer Services
3600 Vineland Rd Suite 121
Orlando, FL 32811
Customer Service: 1-800-883-1001
Phone Number: 407-297-1001
Fax Number: 407-297-4310
Technical Support: 1-888-883-2001

[cdtw9803]

Re: canon ir3235 E804-004

---

Nation-Wide Repair Service
16151 Foster Street
Overland Park, KS 66085
Customer Service: 1-866-655-8676
Fax Number: 913-387-1815
Technical Support: 1-800-798-1814

---

Hytec Dealer Services
3600 Vineland Rd Suite 121
Orlando, FL 32811
Customer Service: 1-800-883-1001
Phone Number: 407-297-1001
Fax Number: 407-297-4310
Technical Support: 1-888-883-2001

it's not difficult to repair the control board. check yellow fuses(as shape as resistor))on the board with multi-meter.multi-meter .

[teckat]

Re: canon ir3235 E804-004

it's not difficult to repair the control board. check yellow fuses(as shape as resistor))on the board with multi-meter.multi-meter .

Poster changed Main Pcb😱

[tekhock]

Re: canon ir3235 E804-004

main controler fan fm4 got running and function, i have check fan volttage output red and black color got output 12v also.

[Tanmoy.pramanik]

Re: canon ir3235 E804-004

Did you check your DC voltage��

canon ir 3225 error code e00804-004.
But ip board fan still running but showing this code.
What can i do plz suggest

[Phil B.]

Re: canon ir3235 E804-004

canon ir 3225 error code e00804-004.
But ip board fan still running but showing this code.
What can i do plz suggest

please start a new thread of your own... this one had been dead since 2017

[Tanmoy.pramanik]

Re: canon ir3235 E804-004

please start a new thread of your own... this one had been dead since 2017

I know but plz help me out this.
I check the dc controler board and ip board fan and those are good. But still showing this error code