Canon ir C5030 Shading Black Text

[maximilian500]

Re: Canon ir C5030 Shading Black Text

Thanks for the reply, I will replace the black developer unit with an new one and see then.

[maximilian500]

Re: Canon ir C5030 Shading Black Text

I have replaced the development unit Black and the error now disappears.

[Abrantes]

Re: Canon ir C5030 Shading Black Text

Hi there.
If you still have the old developer unit i'd suggest that you mesure or try to adjust the trimbar - the metal that adjusts the amount of developer that goes on the magnetic roll- just adjust it a little closer to dev.roll and try to see any difference. Sometimes the excess or lack of developer can cause this kind of shadow

[maximilian500]

Re: Canon ir C5030 Shading Black Text

Hello,
thank you for the tip. I will test this in another machine with the old Developer.

Hi there.
If you still have the old developer unit i'd suggest that you mesure or try to adjust the trimbar - the metal that adjusts the amount of developer that goes on the magnetic roll- just adjust it a little closer to dev.roll and try to see any difference. Sometimes the excess or lack of developer can cause this kind of shadow

[tststs]

Re: Canon ir C5030 Shading Black Text

Thank you very much for your answer. It's very helpful.