[Error Code] Canon ir3245 Ghost printing or double image printing problem

[Guest]

I dont know what to name this problem , getting double image printing pls help me to solve this issue .. i have attached 3 different images of the printing ..i have changed new drum n charging roller as well..Thanks

[dan7777]

Re: Canon ir3245 Ghost printing or double image printing problem

I dont know what to name this problem , getting double image printing pls help me to solve this issue .. i have attached 3 different images of the printing ..i have changed new drum n charging roller as well..Thanks

It looked like fuser at first but your last copy is half good. Maybe main controller at guess. I was going to suggest turn the heat up until I saw the last sample.

[zoraldinho]

Re: Canon ir3245 Ghost printing or double image printing problem

He he.Me too!

Probably messed up with controller or laser unit.

[ss.xerox.print]

Re: Canon ir3245 Ghost printing or double image printing problem

It looked like fuser at first but your last copy is half good. Maybe main controller at guess. I was going to suggest turn the heat up until I saw the last sample.

will ths be the power voltage issue?

[ss.xerox.print]

Re: Canon ir3245 Ghost printing or double image printing problem

He he.Me too!

Probably messed up with controller or laser unit.

laser unit is good.. controller in the sense which one??

[dan7777]

Re: Canon ir3245 Ghost printing or double image printing problem

laser unit is good.. controller in the sense which one??

I doubt it could fix it but on that model you can update the software with a usb thumb drive. Now at 49.02. I don't think power would be an issue unless you have no ground or bad ground and there is a lot of voltage on the ground line. I don't know where you are or what your power is. Lots of people here are from all over. I was guessing at the main controller. Not sure but that model may only have one, some advanced models have a couple. The scanner is another possibility, I have had problems with those on that model, usually strange issues.

[SMART TECH]

Re: Canon ir3245 Ghost printing or double image printing problem

How is the internal print ? if ok then check the scanner cable /connector.

[Jasbeer0129]

Re: Canon ir3245 Ghost printing or double image printing problem

I am also facing same issue but when I reinstall drum unit it work fine for some time.. u can clean a strip placed led on it when u remove drum unit n dp. U will see that strip..

[Venom]

Re: Canon ir3245 Ghost printing or double image printing problem

Try another drum unit, i had one doing the same.

[Phil B.]

Re: Canon ir3245 Ghost printing or double image printing problem

this thread is 5+ years dead.