Canon ir adv8085 slow

[mramlawi]

Wonder that 8085 pro advance machine mu costmer told me its too slow the 6055 is more faster than it in print and copy, im using finisher D1 ,i updated the machine and still saw it slow i also changed the finisher with another one.

any one face this before

[Herrmann]

Re: Canon ir adv8085 slow

Did you monitor the fusing temp? if it gets too low, the mashine slows down, maybe this is a hint in the right direction

[charm5496]

Re: Canon ir adv8085 slow

paper stock settings on plain, and not something funky?

is it starting out at rated speed and then slowing down?

[mramlawi]

Re: Canon ir adv8085 slow

Did you monitor the fusing temp? if it gets too low, the mashine slows down, maybe this is a hint in the right direction

Honestly i replaced the fuser and still the same also i changed the hard disk and still same, i changed the finisher also . The machine slow on 2 sided both on copy and print.

[aco.bk]

Re: Canon ir adv8085 slow

with or without imagePASS-U1 (Optional)???

[Phil B.]

Re: Canon ir adv8085 slow

Honestly i replaced the fuser and still the same also i changed the hard disk and still same, i changed the finisher also . The machine slow on 2 sided both on copy and print.

duplexing always slows down the output speed.
so can improper paper type... check the paper setting thru control panel and thru the driver...

[Herrmann]

Re: Canon ir adv8085 slow

Just a shot in the dark:
I had a similar problem on a advc7065, it turns out to be the image controller (main controller 2 if i remember correctly)
If you have an organ donor, maybe you can give it a try

[mramlawi]

Re: Canon ir adv8085 slow

with or without imagePASS-U1 (Optional)???

without U1 Fiery also on copy 2 sided slow

[mramlawi]

Re: Canon ir adv8085 slow

Did you monitor the fusing temp? if it gets too low, the mashine slows down, maybe this is a hint in the right direction

Yes i moniterd the heater also i changed it and changed the hard disk and still same problem

[mramlawi]

Re: Canon ir adv8085 slow

paper stock settings on plain, and not something funky?

is it starting out at rated speed and then slowing down?

Stocked paper is normal