Ir 2520 jamming in the exit tray

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • margic brian
    Technician
    • Jul 2012
    • 97
    #1

    [Jamming] Ir 2520 jamming in the exit tray

    hi guys,
    puzzling problem of paper getting stack in the exit tray , tried all options cleaned the sensors ,the rollers .

    fixing assembly looks okay. paper settings checked all of them are okay. tried even using by-pass tray but no change.your help will be highly appreciated.
    regards,
    BrianIR 25202.jpgIR 25201.jpg
    Tags: by-pass, exit, jamming, paper, tray
    • shazza
      Technician

      50+ Posts
      • Nov 2009
      • 96
      #2
      Re: Ir 2520 jamming in the exit tray

      Hi

      Check senor
      FC9-0822-000 1 LEVER, REVERSE SENSOR
      SECOND PAPER DELIVERY ASSEMBLY in FIG 351

      regards


      SHazza

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: Ir 2520 jamming in the exit tray

          Originally posted by margic brian
          hi guys,
          puzzling problem of paper getting stack in the exit tray , tried all options cleaned the sensors ,the rollers .

          fixing assembly looks okay. paper settings checked all of them are okay. tried even using by-pass tray but no change.your help will be highly appreciated.
          regards,
          Brian[ATTACH=CONFIG]38239[/ATTACH][ATTACH=CONFIG]38240[/ATTACH]


          jam code

          The Jam Log is included in the Error Log.
          To print out a JAM/ERR Log, perform the following steps:

          Access Service mode> ADDITIONAL FUNCTIONS>2>8>ADDITIONAL FUNCTIONS
          Scroll until you see "# REPORT" press OK
          Scroll until you see "REPORT OUTPUT" press OK
          Scroll until you see "ERROR LOG LIST" press OK
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • roho
              Senior Tech

              500+ Posts
              • Mar 2009
              • 844
              #4
              Re: Ir 2520 jamming in the exit tray

              Originally posted by teckat


              jam code

              The Jam Log is included in the Error Log.
              To print out a JAM/ERR Log, perform the following steps:

              Access Service mode> ADDITIONAL FUNCTIONS>2>8>ADDITIONAL FUNCTIONS
              Scroll until you see "# REPORT" press OK
              Scroll until you see "REPORT OUTPUT" press OK
              Scroll until you see "ERROR LOG LIST" press OK
              I have had it where the machine jams every sheet from every source and not able to print the error codes. Is there anyway to see them in service mode without printing?

                Comment

                Previous template Next
                Working...