Reviving Canon IR c5180

[nicko6113]

Re: Reviving Canon IR c5180

i ordered the cleaning assembly. also i noticed that the smudges show up on the transfer belt before to curls underneath. could it be from a wavy transferbelt?

oh and one other thing. paper trays 1 and 2 will feed paper when the unit is turned on and jam.

[teckat]

Re: Reviving Canon IR c5180

i ordered the cleaning assembly. also i noticed that the smudges show up on the transfer belt before to curls underneath. could it be from a wavy transferbelt?

oh and one other thing. paper trays 1 and 2 will feed paper when the unit is turned on and jam.

---

replace transfer belt
when u remove belt > clean that large black rubber roller--a slick roller will cause drift of sheet & and registration issues

if u have never removed sheet> it can be a little frustration added to the day----the four Primary charging rollers in there are usually ok --unless copy count is high ( the black plastic hold-down tabs on either end have a tendency to crack (causes end of roller to pitch up sheet (causes a drag line on top of sheet )


================================================== ====
YEAR 2009The ITB coming into contact with the belt cover due to static and/or toner build up.---------(-happens a lot on old units )To resolve smudge phenomenon the following changes have been implemented According to your P Print showing orig. v22.00 Main Firmware--u have old type ITB UNIT

[teckat]

Re: Reviving Canon IR c5180

oh and one other thing. paper trays 1 and 2 will feed paper when the unit is turned on and jam.

remove both pick up units

check if damper pad on solenoid is sticky

solenoid.jpg

[nicko6113]

Re: Reviving Canon IR c5180

oh and one other thing. paper trays 1 and 2 will feed paper when the unit is turned on and jam.

remove both pick up units

check if damper pad on solenoid is sticky

[ATTACH=CONFIG]39255[/ATTACH]

yep that was it. cleaned them up and put some tape in there for the time being. now i have 3 out of 4 paper trays working. the 4th has broken gears and missing the paper level sensor.

also ran a print set to heavy paper to slow the printing down. and not a smudge insight. ill probably still order a transfer unit. do you know anyone with a good value?

[teckat]

Re: Reviving Canon IR c5180

yep that was it. cleaned them up and put some tape in there for the time being. now i have 3 out of 4 paper trays working. the 4th has broken gears and missing the paper level sensor.

also ran a print set to heavy paper to slow the printing down. and not a smudge insight. ill probably still order a transfer unit. do you know anyone with a good value?

---

for FM2-5365-010 > contact a Canon Dealership in your area-----that way u won't be purchasing a refurb unit

[nicko6113]

Re: Reviving Canon IR c5180

---

for FM2-5365-010 > contact a Canon Dealership in your area-----that way u won't be purchasing a refurb unit

Will FM2-5365-020 work? it seems to keep being cross referenced.

[guitar9199]

Re: Reviving Canon IR c5180

Will FM2-5365-020 work? it seems to keep being cross referenced.

The last 3 digits of a part number for Canon is usually where you see a revision. The original number was FM2-5365-000... The 010 was a first revision, so 020 is a second update. Usually when they change or update a part of the unit, so the 020 will be fine.

[nicko6113]

Re: Reviving Canon IR c5180

Thanks. i wasn't sure if that what that meant. it was listed as fitting a c5185 and as far as i can tell its almost identical to the c5180. just ordered it brand new for a really good price.