canon ah-1 puncher

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nicko6113
    Technician
    • Mar 2018
    • 34

    canon ah-1 puncher

    i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?
  • kuby
    Senior Tech

    1,000+ Posts
    • Oct 2007
    • 1326

    #2
    Re: canon ah-1 puncher

    What model does this go on?

    Comment

    • nicko6113
      Technician
      • Mar 2018
      • 34

      #3
      Re: canon ah-1 puncher

      oh woops. imagerunner c5180

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16092

        #4
        Re: canon ah-1 puncher

        Originally posted by nicko6113
        i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?

        see attach----------------AH1 Install

        also
        part number for the latch brackets for the Puncher Unit L1/ AH1?



        Support, Latch, Front part number 4F3-1006-000
        Support, Latch , Rear part number 4A3-4662-000
        Below is a picture of the parts manual with arrows pointing to the bracket


        Below is a picture of the Puncher cover with an arrow pointing to the harness.-------make sure to not pinch wire harness


        Attached Files
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • nicko6113
          Technician
          • Mar 2018
          • 34

          #5
          Re: canon ah-1 puncher

          Thanks for the help. Turns out the company I ordered the punch unit from forgot to send the wires. They are in the mail now.

          Comment

          Working...