Ira4025 fax rings

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Brian8506
    replied
    Re: Ira4025 fax rings

    Found it. Service mode/fax/NCU/auto RX/007 change to required number of rings


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Canuck
    replied
    Re: Ira4025 fax rings

    Yes you can on a ira4025. I'm not near a machine but I know for fact that you can on them..fax...auto rx...can't remember. I've had to change them for fax forwarding on VOIP setups. If you're at the machine you can find it. Hit the green "i"for info too

    Leave a comment:


  • Phil B.
    replied
    Re: Ira4025 fax rings

    Originally posted by Brian8506
    Is there a way to change the number of rings for an incoming fax from 2 to 4?


    Sent from my iPhone using Tapatalk
    not for your model... but I kinda doubt they changed it much:

    Canon Knowledge Base - How to change the number of rings before the MX432 '/' MX439 answers incoming call

    Leave a comment:


  • Brian8506
    started a topic [Misc] Ira4025 fax rings

    Ira4025 fax rings

    Is there a way to change the number of rings for an incoming fax from 2 to 4?


    Sent from my iPhone using Tapatalk
Working...