If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have ir5050 machine. i press start key and adf pickup paper but paper jam in pressure roll and jam code like 045 and display jam PI11 in PCB3 delay. I replace ADF but problem is same Pl. help me.
i have ir5050 machine. i press start key and adf pickup paper but paper jam in pressure roll and jam code like 045 and display jam PI11 in PCB3 delay. I replace ADF but problem is same Pl. help me.
Have you tried doing sensor initialize for the ADF? under FEEDER>FUNCTION>SENS-INT in service mode.
Comment