canon ir2200 registration off

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jper34
    replied
    Re: canon ir2200 registration off

    Originally posted by Brian8506
    Sounds like a registration clutch problem


    Sent from my iPhone using Tapatalk
    for some reason I recall a paper guide on the side that breaks, and the
    feed roller shaft flops around. If that is the case, I remember an after market leaf spring you could install..and it worked..check the feed roller shaft on that side...good luck!

    Leave a comment:


  • garrycmsi
    replied
    Re: canon ir2200 registration off

    Thanks for the input it is off the feed way and i believe it has a registration motor

    Leave a comment:


  • teckat
    replied
    Re: canon ir2200 registration off

    Originally posted by garrycmsi
    I have a canon ir2200 and the registration is off by about 1.5 inches usually in the morning from both paper trays. it usually happens first thing in the morning but not every time? any ideas would be a great help.

    THANK YOU
    What direction ?
    Paper Feed
    or Cross Feed😱

    Leave a comment:


  • Brian8506
    replied
    Re: canon ir2200 registration off

    Sounds like a registration clutch problem


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • garrycmsi
    started a topic [Misc] canon ir2200 registration off

    canon ir2200 registration off

    I have a canon ir2200 and the registration is off by about 1.5 inches usually in the morning from both paper trays. it usually happens first thing in the morning but not every time? any ideas would be a great help.



    THANK YOU
Working...