Hi guys.
started with an E020. code. dev unit was packed, so I vacc'd out the excess toner. noticed that someone had mucked up the connector to S25 (td sensor on dev unit). Anyway I've replaced the whole harness. tried swapping the dev unit with one next to it. this does not move the problem.
Still getting E024.
have tried an error clear.
manual says to replace the DC controller.
anyone come across this before ?
started with an E020. code. dev unit was packed, so I vacc'd out the excess toner. noticed that someone had mucked up the connector to S25 (td sensor on dev unit). Anyway I've replaced the whole harness. tried swapping the dev unit with one next to it. this does not move the problem.
Still getting E024.
have tried an error clear.
manual says to replace the DC controller.
anyone come across this before ?