500 results in 0.0550 seconds.
-
Xerox Phaser 7760 - ATC Sensor Failure 09-382
An old machine, I know... However, the machine gives the error code as stated in the title above & what I know from the customer is that they had... -
650i Dumping cyan dev
Hi chaps, got a brand new 650i that installed with no issues then 2 days later we had a callout due to cyan all over prints. Checked the cyan dev and... -
MPC 5503
Anyone have the tech bulletin when replacing the magenta dev unit. Thanks -
IM 7000 dumping dev
Hi all, I have a problem that has happened the last 3 times I rebuild PCDU. I get a call back within days for black marks at bottom of the pages and gritty... -
I Series Dev Unit Convert from Black to Colour
Know people have had success converting K Dev units to colour dev units on the 4 and 8 series machines, has anyone successfully done it on the I Seri... -
KonicaMinolta Over Stock Supplies
I have some consumables for older models see attached list.
No reasonable offer refused you pay shipping.
...Last edited by pepper38_cnd; 09-13-2023, 12:19 PM. -
Task 3500i
Customer put crap toner in and now has background. I looked for developer but looks like only the complete dev unit is sold, not just the developer powder?... -
Konica Minolta C284
Hi Guys,
We have an issue with the magenta dev unit dropping dev onto the magenta drum charge unit causing pink strips on prints.... -
Konica Minolta C458 - yellow issue
Hi guys,
have a Konica C458 that when you replace the yellow developing unit it produces tiny yellow dots on prints.
when I -
-
bizhub 454e blank prints
hi there,
i was seeing a bizhub 454e the client sayed after replacing a toner the machine just prints a blank pages, i saw the dev looks... -
Konica Minolta Bizhub c654e - K developer (?) issues
Two weeks ago my K developer blew about 20% earlier than expected.
when removed, the dev unit seemed nearly empty. I didn't think much of it as... -
8 Series Dev Conversion
Anyone know if its possible to convert a black dev unit for C308 to a colour? i.e using a colour td sensor/chip and running halftones through -
Xerox 700 reset NVRAM
Hello, I have a xerox 700 with a creo server and I have a hard time with the skew on cardboard 1st btr is new and registration buckle seems perfect. However -
