I have a machine that will has a E0009 code as long as i keep the fnt door open other wise as soon as i shut the door the machine CB on back will trip. i reset the connectors for the decurler unit did not help. any suggestions? I think possibly the 24V driver board. Thoughts?
-
-
Re: Image press C1+ E00009
Inspect outlet power and both power connectors.If it ain't broke, don't fix it
A picture is worth a thousand words -
Re: Image press C1+ E00009
hello there...
if mc does not come to the ready state then goes into E009
you will need to replave your DC controller
reason for this is your mc is missing 24v at the J1164 on the dc that goes to the de curler from the Dc.
hope you come right?Comment
Comment