I was having smear printout on my iR105+ ... i had changed the AP kit and whole Unit 1 and also all the PCB. anyone can help ??
-
-
It would help if you could clarify the smearing. Is it happening before the fixing unit? Is it happening after the copy comes out (rubs off?) is it a pattern or random marks? If you have aftermarket Fixing rollers that can cause smearing issues. If it is happening before the FX unit it could be cleaning, but you did the AP kit, dev unit... look for a pattern lead to trail or cross copy? distance between marks consistant? Is it just copies or does it do it in test prints as well?Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it. -
Hi there 20YRSEXP, i had noticed that it smear after fixing... from the test print itself do have smear too... some more it happened not only copy but for printing too.... i had been out of idea already.. pity i am..
Comment
-
Do you mean the toner rubs off after fixing or is it blurred when it comes out of the machine??Comment
Comment