I am getting "Clean Slit Glass" Error On a Canon Imagerunner 4225i

[zoraldinho]

Re: I am getting "Clean Slit Glass" Error On a Canon Imagerunner 4225i

Setting to lower : Copier>Option>IMG-RDR>DFDST-L1 and DFDST-L2

Add..


From service manual !!


Service Mode




(Lv1) COPIER > OPTION > IMG-RDR > DFDST-L1
(used to adjust the dust detection level between sheets)
(Lv1) COPIER > OPTION > IMG-RDR > DFDST-L2
(used to adjust the dust detection level at the end of a job)




Adjust these values to a lower number.Lowering the values reduces the circuit sensitivity.


Adjustment rande 0-255
Default 200
Try with 100 or lower.
Power cycle the machine for a value change to take effect.