Which SMB version support by Canon C5200 series.

[Venom]

Re: Which SMB version support by Canon C5200 series.

For the older machines that didn't support smb v2/3, the special firmware automatically turns on smb v2/3 and turns off smb v1. Note, once special firmware is installed you can not upgrade regular firmware anymore or it will revert back to smb v1.

[techandtrader]

Re: Which SMB version support by Canon C5200 series.

That's what I thought.

Do the new firmware versions for those machines automatically come with SMB 2/3 and it just needs to be enabled, or do I still need to download the "special" firmware that needs a code and password like mentioned a few posts above?

Thats a good question. I think so but not sure.

[lionex3d]

Re: Which SMB version support by Canon C5200 series.

The firmware can be downloaded from the CDS Server:
iRAC 5051 v83.68
Registration ID: 00006109
Password: 50231700

would this version support smb2 scanning?

[Big Flo]

Re: Which SMB version support by Canon C5200 series.

This version can only doawnloaded directly on the device, go to the firmware update menu, select special version and type this values:
Registration ID: 00006721
Password: 43149128

Does this ID and Password work on US Models?

[copier tech]

Re: Which SMB version support by Canon C5200 series.

Is there any chance you have the info for the C350 firmware?

Use the CDS updater of if you want to install it via USB it drop us an email

Firmware Update - Printer & Copier Firmware

[guitar9199]

Re: Which SMB version support by Canon C5200 series.

Is there any chance you have the info for the C350 firmware?

+1 On the C350/C450 models.

[tinalt]

Re: Which SMB version support by Canon C5200 series.

The firmware can be downloaded from the CDS Server:
iRAC 5051 v83.68
Registration ID: 00006109
Password: 50231700

Is there any chance you have the info for the C350 firmware?

[ReproKev]

Re: Which SMB version support by Canon C5200 series.

SMB v1 is definitely still an issue hence Microsoft bringing out an update to disable it. This wasn't a temporary fix but permanent.

All copiers from about 5 years old & newer have had a firmware release fix to enable SMB v2/3

That's what I thought.

Do the new firmware versions for those machines automatically come with SMB 2/3 and it just needs to be enabled, or do I still need to download the "special" firmware that needs a code and password like mentioned a few posts above?

[copier tech]

Re: Which SMB version support by Canon C5200 series.

^^^ Good to know. I was under the impression that SMB 1.0 was still a possible security vulnerability. There are a lot of articles on the internet that say's it is, but it's hard to know what's true and what's opinion.

I've been trying not to enable it on my customers computers unless they absolutely must have SMB scanning on an older machine and they know the risk.

Are you absolutely sure SMB 1.0 isn't a problem anymore? That would be great news to customers with older machines!

SMB v1 is definitely still an issue hence Microsoft bringing out an update to disable it. This wasn't a temporary fix but permanent.

All copiers from about 5 years old & newer have had a firmware release fix to enable SMB v2/3

[ReproKev]

Re: Which SMB version support by Canon C5200 series.

Yes and since then....How to Stop SMBv1 Ransomware Attacks - SpamTitan The flaw has been patched and buried, buried for years now and one can simply add the feature when needed. I don't work at the NSA but i really dont think those old tools are going to make it past the patches anymore. I could be wrong!

^^^ Good to know. I was under the impression that SMB 1.0 was still a possible security vulnerability. There are a lot of articles on the internet that say's it is, but it's hard to know what's true and what's opinion.

I've been trying not to enable it on my customers computers unless they absolutely must have SMB scanning on an older machine and they know the risk.

Are you absolutely sure SMB 1.0 isn't a problem anymore? That would be great news to customers with older machines!

[techandtrader]

Re: Which SMB version support by Canon C5200 series.

Yes and since then....How to Stop SMBv1 Ransomware Attacks - SpamTitan The flaw has been patched and buried, buried for years now and one can simply add the feature when needed. I don't work at the NSA but i really dont think those old tools are going to make it past the patches anymore. I could be wrong!

[ReproKev]

Re: Which SMB version support by Canon C5200 series.

Just add SMB ver 1.0 feature back into the computer if it doesn't work for some reason. None of my C50 or C52 have trouble with SMB.

^^^If you do this, make sure you notify your customer that their computer will be vulnerable to ransomware attacks. Another option would be scan to email or to set up scan with ftp using Filezilla or similar software.

[techandtrader]

Re: Which SMB version support by Canon C5200 series.

Just add SMB ver 1.0 feature back into the computer if it doesn't work for some reason. None of my C50 or C52 have trouble with SMB.

[giogi]

Re: Which SMB version support by Canon C5200 series.

Is this available guys for it ADV 50xx or not please help

The firmware can be downloaded from the CDS Server:
iRAC 5051 v83.68
Registration ID: 00006109
Password: 50231700

[eng_usama]

Re: Which SMB version support by Canon C5200 series.

Is this available guys for it ADV 50xx or not please help