Canon NP6512

[Printer77]

Hello guys, i have problem with this machine, when powers on immediately goes off and show E0-000 Error, i tried shorting JP103 and JP104 to delete this error, it works but after one power off/on error shows again, did anyone have problem like this, i tried everything i change whole fuser unit, toner, drum unit, i dont see any damage on gears, no paper left inside..?, ty Josip.

[rapidocument]

Re: Canon NP6512

I don't see that you have monitored the voltage from the wall outlet to see if it's below specifications. (depending on the country you are), some use 110, others 117VCA other places is 220 VCA.