Canon Parts source

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Desert Rat
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2008
    • 1089
    #1

    [Misc] Canon Parts source

    Most of the time I use Precision roller for my immediate parts need on Canons. I was just informed that they no longer
    have an arrangement with Canon for parts.
    I may have to get a main board for the IRA C2030. For boards I usually go to Hytec or Nationwide. But for the other things
    like feed rollers and other stuff I would usually use Precision roller.

    Any suggestions where an indy can get parts for Canons?

    Thanks

    DR
    Tags: canon, canons, parts, roller
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22744
      #2
      Re: Canon Parts source

      I used to get Canon parts from Executive Color (Executive Color Systems, Inc.) but there are no longer any references to Canon, so I think that they've changed their focus to KM.

      You can get fusers and fuser parts from:
      Fixing Assembly, Fixing Film Unit, Canon, Gestetner, HP, Lanier, Ricoh, Savin
      - Fusion Image Technology

      You can try:
      bizhub Imaging Units, Toner, Developer Units, Fusers

      The other places aren't in business any longer. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16092
          #3
          Re: Canon Parts source

          Originally posted by Desert Rat
          Most of the time I use Precision roller for my immediate parts need on Canons. I was just informed that they no longer
          have an arrangement with Canon for parts.
          I may have to get a main board for the IRA C2030. For boards I usually go to Hytec or Nationwide. But for the other things
          like feed rollers and other stuff I would usually use Precision roller.

          Any suggestions where an indy can get parts for Canons?

          Thanks

          DR


          Aliexpress.com
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22808
              #4
              Re: Canon Parts source

              canon item inc

              ???

                Comment

                Previous template Next
                Working...