Canon CLC 3200 Delivery Tray Fault

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 11624bill
    Junior Member
    • Aug 2016
    • 9
    #1

    Canon CLC 3200 Delivery Tray Fault

    When printing SRA3 sheets the delivery tray opens. I'm printing onto 280 micron (190gsm) board from the stack bypass, as I've done scores of times. But now when the material gets to the Fuser, the tray shoots out.

    This has only recently started to happen. I've tried a few different types of board, but its still happening.
    Any advice would be appreciated.
    Tags: board, canon clc 3200, delivery unit, printing, tray
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808
      #2
      Re: Canon CLC 3200 Delivery Tray Fault

      Originally posted by 11624bill
      When printing SRA3 sheets the delivery tray opens. I'm printing onto 280 micron (190gsm) board from the stack bypass, as I've done scores of times. But now when the material gets to the Fuser, the tray shoots out.

      This has only recently started to happen. I've tried a few different types of board, but its still happening.
      Any advice would be appreciated.
      you have posted in the wrong forum... please post your issues here"

      Copytechnet.com
      https://www.copytechnet.com/forums/canon/


      please review the "Forum Rules"

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22702
          #3
          Re: Canon CLC 3200 Delivery Tray Fault

          Could you be posting on a 20 year old copier?
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • 11624bill
              Junior Member
              • Aug 2016
              • 9
              #4
              Re: Canon CLC 3200 Delivery Tray Fault

              Originally posted by Phil B.
              you have posted in the wrong forum... please post your issues here"

              Copytechnet.com
              https://www.copytechnet.com/forums/canon/


              please review the "Forum Rules"
              Oops! Sorry about that. I've re-posted it as requested.

                Comment

                Previous template Next
                Working...