IR Adv C3320 thick paper issue.

[Copylady72]

Re: IR Adv C3320 thick paper issue.

i have Heavy 3 (160-220gsm) and Heavy 4 (220-256gsm) option showing in the control panel
when feeding through bypass.

there is not heavy 6 option.

Ok, just asking. Have you done a full auto gradation adjustment for heavy 4 paper?

Sent from my SM-N950U using Tapatalk

[uclbph]

Re: IR Adv C3320 thick paper issue.

. Clean the metal contact that touches the shaft near the end and apply conductive grease. Did you do all the proper gradations as I suggested? Could be a bad HVT.. hard to say. Definitely a transfer issue

gradation done on plain & 256 gsm paper. looks good, but printing on heavy paper not good.
will apply conductive grease and see,
thanks for suggestion.

[uclbph]

Re: IR Adv C3320 thick paper issue.

problem solved by changing the value 0 to +30 in

Copier>Adjust>HVTR>2TR.


dose it will effect any other things ?

[petermays]

Re: IR Adv C3320 thick paper issue.

hello

what you have done is.you told mc to give more bias charge to the 2nd transfer roller.

it may cause a issue with plain.but that you will need to test.
only time when you do this is when 2nd transfer roller is giving a issue with cq.
you tried to change roller?

[uclbph]

Re: IR Adv C3320 thick paper issue.

hello

what you have done is.you told mc to give more bias charge to the 2nd transfer roller.

it may cause a issue with plain.but that you will need to test.
only time when you do this is when 2nd transfer roller is giving a issue with cq.
you tried to change roller?

Not changed the roller. just cleaned and changed the setting and it works in both plain & thick papers.