Canon IR6255 Nothing But Power Light and Energy Save on

[doug]

This is a good one...traded in a Canon IR6255 and the only thing that lights up is power and energy save button...looks like HDD is in but what else can it be?
Thanking all of you in advance.
Doug

[GIUBOSS]

Re: Canon IR6255 Nothing But Power Light and Energy Save on

Removing and reistall Main Controller PCB 1

[doug]

Re: Canon IR6255 Nothing But Power Light and Energy Save on

Hello There!
I removed and reinstalled main PCB and still no results...do you have any other ideas?
Thanking you in advance,
Doug

[julka123]

Re: Canon IR6255 Nothing But Power Light and Energy Save on

Hello There!
I removed and reinstalled main PCB and still no results...do you have any other ideas?
Thanking you in advance,
Doug

Hi , replace flash pcb

[Canuck]

Re: Canon IR6255 Nothing But Power Light and Energy Save on

Run controller/boot diagnostics. Open all doors,drawers,etc before trying to boot. Could be bad main con

[charm5496]

Re: Canon IR6255 Nothing But Power Light and Energy Save on

Normally it's the main controller with these symptoms. Make sure you swap over all the boards from the old one to the new one when you replace it.