imageRUNNER ADVANCE DX C3725 how to enter the factory mode? - Copytechnet.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

ts-lx

Technician

50+ Posts

Join Date: May 2011

Posts: 59
#1

[CQ] imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

06-07-2020, 08:44 AM

imageRUNNER ADVANCE DX C3725 how to enter the factory mode?thank !
Tags: advance, c3725, enter, factory, imagerunner
giogi

Engineer senior

100+ Posts

Join Date: Jan 2016

Posts: 181
#2

06-07-2020, 08:12 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

factory mode or service mode?

are you a engineer?

"Knowledge is a source, but unfortunately ignorance is a sea."
Comment
ts-lx

Technician

50+ Posts

Join Date: May 2011

Posts: 59
#3

06-08-2020, 03:29 AM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by giogi

factory mode or service mode?

are you a engineer?

factory mode

thank
Comment
mga

Copier Technician

Site Contributor
1,000+ Posts

Join Date: Dec 2010

Posts: 1393
#4

06-08-2020, 08:20 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by ts-lx

imageRUNNER ADVANCE DX C3725 how to enter the factory mode?thank !

Do you mean level 2 in service mode

Regards Mark

FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

https://copierservices.simdif.com
Comment
alex@wocltd.com

Trusted Tech

250+ Posts

Join Date: Nov 2007

Posts: 430
#5

06-10-2020, 05:04 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

factory mode same as before(ignoring the fact 100% touchscreen) - what youre gonna achieve in there?
Comment
ts-lx

Technician

50+ Posts

Join Date: May 2011

Posts: 59
#6

06-22-2020, 01:59 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by ts-lx

imageRUNNER ADVANCE DX C3725 how to enter the factory mode?thank !

OK

It 's done
Comment
johncord

Technician

Join Date: Jun 2015

Posts: 17
#7

09-13-2020, 07:06 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Info regards login as administrator tried the xxxxxx2xx and did no manage as tried to personalize key display invain, can any one supply info .. last canon i had was a CLC700 then switched to ricoh which are very user friendly and now switched again to canon , any one have available service manual... thank you

Last edited by johncord; 09-13-2020, 07:34 PM.
Comment
Phil B.

Field Supervisor

10,000+ Posts

Join Date: Jul 2016

Posts: 22798
#8

09-13-2020, 07:17 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by johncord

Info regards login as administrator tried the 7654321 and did no manage as tried to personalize key display invain, can any one supply info .. last canon i had was a CLC700 then switched to ricoh which are very user friendly and now switched again to canon , any one have available service manual... thank you

you really shouldn't post that public.. too many end users here ...
Comment
johncord

Technician

Join Date: Jun 2015

Posts: 17
#9

09-13-2020, 07:28 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

ok, understand .. is there a way on this forum to remove it.. ??
Comment
Phil B.

Field Supervisor

10,000+ Posts

Join Date: Jul 2016

Posts: 22798
#10

09-13-2020, 07:32 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by johncord

ok, understand .. is there a way on this forum to remove it.. ??

go back edit then delete
Comment
johncord

Technician

Join Date: Jun 2015

Posts: 17
#11

09-13-2020, 07:35 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

just found the way to edit ...did it .tks
Comment
johncord

Technician

Join Date: Jun 2015

Posts: 17
#12

09-13-2020, 07:43 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

thank you , can you help please..any suggestions
Comment
johncord

Technician

Join Date: Jun 2015

Posts: 17
#13

09-14-2020, 09:10 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Just note i thought i made a sacrilege putting the xxxxx2x code, but the code is on the op manual online... i knew i saw it on a public site.
Comment
ts-lx

Technician

50+ Posts

Join Date: May 2011

Posts: 59
#14

10-23-2020, 02:20 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by alex@wocltd.com

factory mode same as before(ignoring the fact 100% touchscreen) - what youre gonna achieve in there?

Hello, do you know how to enter the development mode? Thank you
Comment
RMWestcott

Junior Member

Join Date: Sep 2017

Posts: 2
#15

11-12-2020, 07:00 PM

Re: imageRUNNER ADVANCE DX C3725 how to enter the factory mode?

Originally posted by Phil B.

you really shouldn't post that public.. too many end users here ...

Just a heads up that your quoted text contains the password that was edited out.
Comment

Previous template Next

Working...