iR Adv C3325i firmware needed

[guitar9199]

Hey troops,

I have a tech in another state with an iR Advance C3325i that just popped a 602 error. I have a hard drive I can ship to him, but my laptop that had all my Canon firmware went belly-up...and I no longer have an active eSupport ID.

Is it possible to have someone send me a dropbox link to download the USB version of the file?

Thanks in advance,,,,

[mga]

Re: iR Adv C3325i firmware needed

Hey troops,

I have a tech in another state with an iR Advance C3325i that just popped a 602 error. I have a hard drive I can ship to him, but my laptop that had all my Canon firmware went belly-up...and I no longer have an active eSupport ID.

Is it possible to have someone send me a dropbox link to download the USB version of the file?

Thanks in advance,,,,

You know you can't send any shop bought hdd if you sending him one it needs to from the same series copier with will already have the system software installed on it

[Cipher]

Re: iR Adv C3325i firmware needed

PM sent.

[unique3]

Re: iR Adv C3325i firmware needed

PM sent.

Hi Cipher,
I have the exact same issue and need the firmware for the C3325i. I'mm wondering if you could help me out

Thank you in advance.

[copier tech]

Re: iR Adv C3325i firmware needed

Hi Cipher,
I have the exact same issue and need the firmware for the C3325i. I'mm wondering if you could help me out

Thank you in advance.

We can supply this for you, Drop us an email.

Printer & Copier Firmware - www.printerfirmware.co.uk

[morph163]

Re: iR Adv C3325i firmware needed

Hello guys,
I have the same problem too, I think.
I had the error e748-2010, after disconnecting the hdd I now have the error
E602-0001
I can enter the sage mode

It shows it has
Mncon(Std):
Mncon(Safe): 06.32
Dcon : 07.03


Is there any tutorial how to set up a new hdd?
Thanks for your help in advance. And how to make a sst connection? Do I need to use a crossed cable or can I also use a non crossed cable with a switch?

Best regards

[copier tech]

Re: iR Adv C3325i firmware needed

Hello guys,
I have the same problem too, I think.
I had the error e748-2010, after disconnecting the hdd I now have the error
E602-0001
I can enter the sage mode

It shows it has
Mncon(Std):
Mncon(Safe): 06.32
Dcon : 07.03


Is there any tutorial how to set up a new hdd?
Thanks for your help in advance. And how to make a sst connection? Do I need to use a crossed cable or can I also use a non crossed cable with a switch?

Best regards

We are happy to supply the SST & firmware. Drop us an email.

We can supply most major manufacturers printer & photocopier firmware. Click Here To Download - Ricoh, Konica Minolta, Kyocera, Lexmark or Canon Firmware

[helsinki]

Re: iR Adv C3325i firmware needed

Hey guys,

any chance somebody still has that firmware, would be greatly appreciated.

[copier tech]

Re: iR Adv C3325i firmware needed

Hey guys,

any chance somebody still has that firmware, would be greatly appreciated.

Happy to help. Feel free to contact us at the web link below.

www.printerfirmware.co.uk

[ADV COPIER]

Re: iR Adv C3325i firmware needed

Hey guys,

any chance somebody still has that firmware, would be greatly appreciated.

check PM

[RBM]

Re: iR Adv C3325i firmware needed



check PM

can you give the firmware to me also pls

[ADV COPIER]

can you give the firmware to me also pls

make a small contribution to this site, and I will give you free firmware

[RBM]

make a small contribution to this site, and I will give you free firmware

what contribution can i make?