irc 2020 e025-000

[ernesto]

HI

I have an irc 2020 with intermitent error irc e025-000

the density yellow is right near 0 (-080) and the yellow color is ok, tough the drum yellow drum life is 90 per cent

I replaced yellow bottle toner because it was nearly fisnished, and I cleared dc con, it must be said before restored the dc con data, the e025 error always appeared, when i restored the dc con data, the error is intermitent again

does any one knows the problem?

I hope to hear from you soon

[20 year tech]

Re: irc 2020 e025-000

imageRUNNER ADVANCE C2020 / C2030 / C2225 / C2230

Title : E025-0000 Error Code

Problem : Machine will not come to ready and an E025-0000 code is displayed. Solution : Cleaning PS6 (Toner Supply Sensor) resolved the E025-0000 code. PS6 is located on the left side of the machine behind the laser.

[copier tech]

Re: irc 2020 e025-000

HI

I have an irc 2020 with intermitent error irc e025-000

the density yellow is right near 0 (-080) and the yellow color is ok, tough the drum yellow drum life is 90 per cent

I replaced yellow bottle toner because it was nearly fisnished, and I cleared dc con, it must be said before restored the dc con data, the e025 error always appeared, when i restored the dc con data, the error is intermitent again

does any one knows the problem?

I hope to hear from you soon

• Code: E025-0000
• Description:Toner Supply Motor (Y) lock detection
  Failed to detect rotation after turning ON the motor.
• Remedy:Possible cause: overload with the motor or motor failure 1. Check conduction with FU2 on the DC Controller PCB (UN09) 2. Check the harness/connector between the DC Controller PCB (UN09/ J23) and PS06. 3. Replace the DC Controller PCB (UN09) Check the harness toward the sensor 4. Check the Hopper Unit (Y) 5. Replace the Hopper Unit (Y).

[repeatcopiers]

Re: irc 2020 e025-000

HI

I have an irc 2020 with intermitent error irc e025-000

the density yellow is right near 0 (-080) and the yellow color is ok, tough the drum yellow drum life is 90 per cent

I replaced yellow bottle toner because it was nearly fisnished, and I cleared dc con, it must be said before restored the dc con data, the e025 error always appeared, when i restored the dc con data, the error is intermitent again

does any one knows the problem?

I hope to hear from you soon

Were you able to resolve this? I have a customer with E025-0100 on same model.

[ernesto]

Re: irc 2020 e025-000

Were you able to resolve this? I have a customer with E025-0100 on same model.

I Replaced the Hopper Unit (Y) 3 three days ago and there is no e025 code error for now