Imagepress 500-0004 pod deck lite error

[Jasper Bürotechnik]

Oh, it does, I was looking for it wrong: DK-RCV! Thanks!

[Jasper Bürotechnik]

Ahh, thank you very much for the feedback, but I have a 600i and I don't think it has this feature yet.

[khaled_abosere3@yahoo.com]

to realize this error follow the following steps:
1-open deck paper stock manually
2-enter service mode---->mode list---->copier----->function------>clear---->DK-RCV
then press ok
3-restart the machine

[Jasper Bürotechnik]

Hello khattab.al.masry where is the "in service mode make clear to deck-recev"

[Jasper Bürotechnik]

Hello alangraph, were you able to fix the error back then? I'm having the same problem right now.
Regards, Friedel

[alangraph]

Re: Imagepress 500-0004 pod deck lite error

Hi, can you upload the complete PDF? I don't have this one. Thanks.

Enviado desde mi SM-A505G mediante Tapatalk

[khattab.al.masry]

Re: Imagepress 500-0004 pod deck lite error

This means you need to installation manual right.

here what you needed

[khattab.al.masry]

Re: Imagepress 500-0004 pod deck lite error

This means you need to installation manual right.

[alangraph]

Re: Imagepress 500-0004 pod deck lite error

Dear:
We faced this problem many time the actions was taken as follow:
1-have backup of dc-con readings
2-make a clear for dc-con
3-in service mode make clear to deck-recev
4-then make restore to dc-readings
I hope this procedures may help you.


Sent from my CPH2015 using Tapatalk

[khattab.al.masry]

Re: Imagepress 500-0004 pod deck lite error

Dear:
We faced this problem many time the actions was taken as follow:
1-have backup of dc-con readings
2-make a clear for dc-con
3-in service mode make clear to deck-recev
4-then make restore to dc-readings
I hope this procedures may help you.


Sent from my CPH2015 using Tapatalk

[alangraph]

Hi, i have a ImagePress 750 with a pod deck lite c1. After power on the machine report an error and call service rep for de drawer 4 (pod deck lite)
The error is reported as 500-0004, i have tested all the sensors and motros of the pod lite in the SITUATION-SENSOR AND SITUATION-PARTS and all are working, also executed the FUNCTION-CST DK1-INT1 DK1-LIFT and all sems to be working.
Any ideas in what is this error and how to solve it?
In the manual there is no info to fix this.
"E500-0004-05 POD Deck communication error
Detection Description A communication error of the POD Deck was detected.
Remedy Turn OFF and then ON the main power.
If the error is not cleared, collect debug log and contact the sales company.