Canon IRA C2020 New Drum Installation Procedure

[doug]

Hi guys,
After replacing a new drum, there is a procedure in service mode that should be performed...can anyone walk me through this
Thanking all of you in advance.
Doug

[Brian8506]

[copier tech]

Re: Canon IRA C2020 New Drum Installation Procedure

Hi guys,
After replacing a new drum, there is a procedure in service mode that should be performed...can anyone walk me through this
Thanking all of you in advance.
Doug

You get instructions inside the box with the new drum.

[Iradfo01]

Re: Canon IRA C2020 New Drum Installation Procedure

Hi
iR adv 20/22 Drum replacement
When replacing any drums, always perform the T1-UP reset action which helps prevent the primary transfer voltages from continually increasing.
Prior to any new drum or ITB Assembly replacement you need to run the ITB/Drum replacement mode,
this is found in service mode or in the user options (if enabled in service mode)
Primary Transfer Roller disengagement COPIER >FUNCTION > MISC-P > T1-UP


The ITB/Drum replacement mode has two functions:
1: Primary Transfer Roller Disengagement Control: Implementing this function will disengage the
Primary Transfer Roller otherwise, the ITB can be in contact with the Drum Unit and possible
damage to the ITB may occur
2: Operating this function prior to ITB/Drum replacement will initialise the transfer and laser settings
forcing the machine when reading the patch sensors to recalculate the tables for (ARCDAT/DHALF/
PASCAL Control) to achieve optimum image stabilization