Canon C3530i

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • copytech,mike
    replied
    Re: Canon C3530i

    Originally posted by Canuck
    Imagerunner Advanced Colour C3530i? Switch black drum with yellow. Still there? Replace the black dev assembly., as "copier tech" suggested. A dirty laser path would lighten the image, not cause a semi-repetitive "spot-black" grey line. Itb cleaning failure would give a brownish waste toner coloured(process black/grey) line. A Test 10 would have been nice from service mode. As suggested, change the black dev
    Maybe blk dev unit yes but i went over it really well and it seems ok. Theres a wear line on my belt and outer trans roller.

    Leave a comment:


  • Phil B.
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    Im in no such violation.
    Bullshit you need to READ the forum rules i mentioned clearly in violations.
    If you weren't so arrogant you'd notice it.

    Sent from my SM-G960U using Tapatalk

    Leave a comment:


  • slimslob
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    Im in no such violation.
    That will be for the admin to decide not you.

    Leave a comment:


  • copytech,mike
    replied
    Re: Canon C3530i

    Originally posted by Phil B.
    violation of forum rules:

    1. We reserve the right to remove offensive posts without notice and also reserve the right to ban anyone who willfully violates the forum rules

    9. Also while these rules cover most common situations, they cannot anticipate everything. Consequently we reserve the right to take any actions we deem appropriate to ensure these forums are not disrupted or abused in any way.

    4. We do not allow posts or links to sites that are pornographic in nature or violate Copytechnet community standards. The Copytechnet staff shall be the sole arbitrator of what does and what does not violate community standards.
    Im in no such violation.

    Leave a comment:


  • Phil B.
    replied
    Re: Canon C3530i

    Originally posted by slimslob
    It is a good thing that you are the owner. Otherwise I would be contacting your boss and informing him of your extremely bad attitude.

    Leave a comment:


  • Phil B.
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    you are not a technician. Thousands of innocent people are getting killed by guns and you are on here using an assault weapon as your prophie photo to intimidate people and promote your 10,000 political posts on a website that is supposed to be for copier tech help. Get the heck off this website. [ATTACH=CONFIG]49236[/ATTACH]
    aww poor little wimp you are intimidated by a cartoon pic? Are you a secret muslim? my pic is an AR15 muslims use AR-47/74 a way more powerful weapon.

    bet you (living in MD) haven't even HELD a firearm... guns don't kill people STUPID liberals with guns kill people...

    do you know rifles are used less frequently in shootings than pistols? My AR15 isn't even as powerful as my 40cal semiauto pistol

    hell more killings are committed by people using knives and hammers that firearms. So if you are going to talk about firearms make damn fucking sure you have the FACTS to back up your bullshit because

    My facts don't give a FUCK about your wimpy ass feelings.

    check out these facts about who gets killed more by cops.... FBI — Expanded Homicide Data Table 6

    Leave a comment:


  • Phil B.
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    You Phil are arrogant and i have heard how you corrospond to newbies and you have no business on here and i don't care about your Rep score because it is 100% meeningless to me. I have been working on copiers and attending Factory training schools longer than you have been alive and i Stand by all of my statements about you. Now get off this webite. Do not make anymore post. And take your Blackcat Pal with you. You are not going to have any luck with your false report about me. I AM NOT ANY PORNOGRAPHIC VIOLATOR. IM A COPIER COMPANY OWNER. YOU ARE THE ONE WHO IS ABOUT TO GET REPORTED. I dont hide my face but you do hide your face. I AM MICHAEL GINGELL OF ADVANCED COPIER SOLUTIONS OF SILVER SPRING MARYLAND. NOW GET OFF THIS FORUM.[ATTACH=CONFIG]49229[/ATTACH]
    go suck a big one little boi... I have every right to be on this forum... same as YOU for now.

    Leave a comment:


  • slimslob
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    You Phil are arrogant and i have heard how you corrospond to newbies and you have no business on here and i don't care about your Rep score because it is 100% meeningless to me. I have been working on copiers and attending Factory training schools longer than you have been alive and i Stand by all of my statements about you. Now get off this webite. Do not make anymore post. And take your Blackcat Pal with you. You are not going to have any luck with your false report about me. I AM NOT ANY PORNOGRAPHIC VIOLATOR. IM A COPIER COMPANY OWNER. YOU ARE THE ONE WHO IS ABOUT TO GET REPORTED. I dont hide my face but you do hide your face. I AM MICHAEL GINGELL OF ADVANCED COPIER SOLUTIONS OF SILVER SPRING MARYLAND. NOW GET OFF THIS FORUM.[ATTACH=CONFIG]49229[/ATTACH]
    It is a good thing that you are the owner. Otherwise I would be contacting your boss and informing him of your extremely bad attitude.

    Leave a comment:


  • slimslob
    replied
    Re: Canon C3530i

    Originally posted by Phil B.
    wow that's really winning friends and influencing fellow techs.
    Originally posted by Phil B.
    there are more people killed by CARS every year than by guns and that avatar is available thru CTN so go complain to Aneurysm because he is the owner and ONLY admin here.

    it's not JUST for copier/printer help as you are well aware because you trolled me on the RANT & RAVES forums.

    and posting 5-10 comments blasting two senior techs in a row is a little over the top.

    self proclaiming you now RUN the canon threads doesn't mean shit until Aneurysm gives you that title. so go plead with his to see if you get that job.

    you have a lower rating than me here so you get off this website...

    you are really making an ass of yourself... go drink a beer.. smoke a joint .. or tug your babymaker... but chill the fuck out.

    "you are not a technician " really so those thousand printed certs from all sorts of brands don't mean shit huh?
    Based from what I have seen reading through this thread, when the admin gets time to review the reports on this thread copytechmike will be deleted from this website.

    FYI, SEF and LEF stand for Short Edge Feed and Long Edge Feed. I learned that at the first instructor lead class I attended which was over 20 years ago. It help identify where marks on prints are in the direction of the feed or across the direction of the feed.

    Leave a comment:


  • Phil B.
    replied
    Re: Canon C3530i

    Originally posted by copytech,mike
    Aneurysm. Thousands of innocent people are getting killed by guns and you are on here using an assault weapon as your prophie photo to intimidate people and promote your 10,000 political posts on a website that is supposed to be for copier tech help. Get the heck off this website. [ATTACH=CONFIG]49236[/ATTACH]
    there are more people killed by CARS every year than by guns and that avatar is available thru CTN so go complain to Aneurysm because he is the owner and ONLY admin here.

    it's not JUST for copier/printer help as you are well aware because you trolled me on the RANT & RAVES forums.

    and posting 5-10 comments blasting two senior techs in a row is a little over the top.

    self proclaiming you now RUN the canon threads doesn't mean shit until Aneurysm gives you that title. so go plead with his to see if you get that job.

    you have a lower rating than me here so you get off this website...

    you are really making an ass of yourself... go drink a beer.. smoke a joint .. or tug your babymaker... but chill the fuck out.

    "you are not a technician " really so those thousand printed certs from all sorts of brands don't mean shit huh?

    Leave a comment:


  • copytech,mike
    replied
    Re: Canon C3530i

    [QUOTE=Phil B.;1777835]violation of forum rules:

    1. We reserve the right to remove offensive posts without notice and also reserve the right to ban anyone who willfully violates the forum rules

    9. Also while these rules cover most common situations, they cannot anticipate everything. Consequently we reserve the right to take any actions we deem appropriate to ensure these forums are not disrupted or abused in any way.

    4. We do not allow posts or links to sites that are pornographic in nature or violate Copytechnet community standards. The Copytechnet staff shall be the sole arbitrator of what does and what does not violate community standards.
    Attached Files
    Last edited by copytech,mike; 05-24-2021, 03:26 AM.

    Leave a comment:


  • blackcat4866
    replied
    Re: Canon C3530i

    From your sample:

    C: 2%,
    M: 3%
    Y: 0%
    K: 15%

    Sounds like composite black to me.

    ColorPic.jpg

    =^..^=

    Leave a comment:


  • Canuck
    replied
    Re: Canon C3530i

    Imagerunner Advanced Colour C3530i? Switch black drum with yellow. Still there? Replace the black dev assembly., as "copier tech" suggested. A dirty laser path would lighten the image, not cause a semi-repetitive "spot-black" grey line. Itb cleaning failure would give a brownish waste toner coloured(process black/grey) line. A Test 10 would have been nice from service mode. As suggested, change the black dev

    Leave a comment:


  • copier tech
    replied
    Re: Canon C3530i

    ​Anyway back on topic!

    Check the k developer unit, I suspect from your print samples you have a build on the dev roller this would explain when you get this band when printing yellow only.


    An ITB cleaning issue would produce thick often brown lines not a think band.



    Leave a comment:


  • copytech,mike
    replied
    Re: Canon C3530i

    Originally posted by Phil B.
    you quoted blackcat but you used my name?

    what are you with me on? that you don't know LEF or SEF? i would say SEF since you state there is the defect on the left hand side of the belt.

    was the cleaner unit BRAND NEW? or rebuild? did you make sure the blade in the cleaner was properly powdered? if a used belt cleaner did you vaccume it out?

    are you sure the rollers in the ITB are coming up properly and not dipping or not contaminated .

    please tell us they are using genuine OEM supplies!

    is the machine clean inside? laser lenses ?

    is the mark on the old drum unit?

    soo many things you haven't explained.
    A laser lens has nothing to do with a black line.

    Leave a comment:

Working...