e110-002 intermittent error
REPLACED LASER UNIT,dc con,mn-controller
checked door switch also
sometimes jam code 0b00
REPLACED LASER UNIT,dc con,mn-controller
checked door switch also
sometimes jam code 0b00
-
-
You can have a lot of reasons for that code. A short, a pinched wire etc.,
0B00 would indicate a door open but check the grounding plate for the reg roller if that looks good check any other grounds that may have a bad connection.Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.
Comment