114 results in 0.0337 seconds.
-
Bizhub C550 right door open limit switch faulty
There are two switches. A microswitch on a spring pivot further up. Then there's a switch with a push pin. The push pin switch is fried. It is a heavy... -
mpc 4500 black toner not loading. HELP!!
first of all i suspected that the toner might be faulty. toner was changed twice including eith a compatible toner bottle.
i then thought of vacuuming... -
e-Studio 600, C code...
I've been out to replace the Thermistors. Still getting the code. I think there's something going on with the machine when the customer clears a jam and... -
Canon IR 105 with an E 012
I have replaced the DC Controller, Drum Drive Unit, and Drum Shaft and Bearings. I have cut the wire ties and isolated the wires and connectors. The wires... -
e3511 close front cover
all doors is closed - fuses is ok but still saying close front cover ? any ideas please . -
Canon IR2018 ERROR
Please help, I have on Canon IR2018 error mesage close front/left cover. -
iR3045 Finisher Problem
Good day to all you guys,
Have these finisher on these machine where the finisher tray refuse to go down when you do multiple copies say... -
fs-2000d jams no paper feed
This machine is driving me nuts. It doesn't jam all the time. maybe three-four times a day. When it jams no paper is fed and no paper anywhere. Here is... -
E 540-8005
I have had some issues recently with Canon S-1 Finishers on 2270 type machines throwing E540-8005 codes. These have had single bins (I know about the... -
sharp AL-1200
drum indicator still blinking after replaced a new drum cartridge..
what should i do...
any sp mode to reset drum counter
& if... -
Arc150 fusing oil coating kit
I'm rebuilding and arc150 fuser. The oil coating kit comes with a bottle of oil and the service manual doesn't say what to do with this. Is anyone familiar... -
Ricoh 2022 tonner problem
Hi,
Today i was checking one aficio 2022 that ask for tonner, the problem is the client was using not original tonner and now machine ask... -
AFICIO 2045e with TONER BOTTLE ISSUE
Unit produces about 1000 copies ( 1 K ) and then starts to put the message and red warning " TONER BOTTLE ALMOST EMPTY " followed by "... -
Canon ir 3035 - E540-8005
Problem with the S1 finisher. The tray does not go up and down. And it gives a Unable to use finisher error. Did not find anything in the manual about... -
C1 error E0749-0003
After really going thru this C1 I did a full upgrade on the firmware/software V66.04 from the PC.several times
I noticed the led on the DC...
