C2880i Color Displace Help

[chrineuh]

Re: C2880i Color Displace Help

Hello,

Can someone send me the P-Print form an IRC2880 ?

I have lost my last pintout and now I can 't ste the DENS values.

Tanks

[fchu5959]

Re: C2880i Color Displace Help

Hello,

I have found this:

[ATTACH=CONFIG]50209[/ATTACH]

In the text they mean i can do :
1) Perform the service mode > service chart print > service chart print 8.

But if I print in Service mode PG type 8 the image dose not look like in pic 2.


[ATTACH=CONFIG]50208[/ATTACH]

Dose someone know how i can print this out ( with that chart i can easy ajust the offset of the colors)

On the next page is a calculation to get the rigth offset values.

The manual is there Canon iR C2880 series Manuals | ManualsLib

and it is on page 504

Thanks

Try PG-TYPE 6
I have serviced lots of these machines for more than 10 years and i have never had to use offset values to cater for color displacement.
Just make sure the two sensors on the iTB are clean .otherwise the drums,itb cleaning blade and/or the belt itself could be defective.

[chrineuh]

Re: C2880i Color Displace Help

Hello,

I have try the PG Testprint 6 and that is not the chart like in the Manual, it is an grid with 1cm spaning (wehre you can see the displacement of the colors.