Canon IR 2880 Won't print from IMAC

[Ryder7424]

Canons drivers

<http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct>

Canon's website is impossible to find anything.... apparently the driver I need is at that address but my ir2880i doesn't seem to appear in any list.

Searching the entire website for ir2880i shows "no results found"

[Guest]

Macbook Pro Intel, Mac OS 10.5.6,

This is the latest PPD driver,
PPD v2.70 for Macintosh OS9.1 or later / OSX 10.2.8 or later / Intel Mac 10.4.9

Intel mac os 10.5.6 doesn't fit the requirement..
I guess you would have to wait.
Canon U.S.A: Support

Screwtape.

[mrfixit51]

<http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct>

Canon's website is impossible to find anything.... apparently the driver I need is at that address but my ir2880i doesn't seem to appear in any list.

Searching the entire website for ir2880i shows "no results found"

Canon U.S.A: Support

You need to be searching for iRC2880, not iR2880, as the latter does not exist to my knowledge. This page puts you into the correct ballpark, if what you seek is not here, then I am not sure what recourse you may have to resolve your printing issues. Good luck!

[Ryder7424]

Macbook Pro Intel, Mac OS 10.5.6,

This is the latest PPD driver,
PPD v2.70 for Macintosh OS9.1 or later / OSX 10.2.8 or later / Intel Mac 10.4.9

Intel mac os 10.5.6 doesn't fit the requirement..
I guess you would have to wait.
Canon U.S.A: Support

Screwtape.

Thanks for the info Screwtape. I'll try downgrading to 10.4.9 (10.5.6 on non-intel machines works fine). Also the link you gave me doesn't have the latest PPD v2.70 (it only has 2.6) - where do I get 2.7 if not from Canon?

Thanks
Richard

[disam]

Hi ryder

you find the 2.7 PPD for mac here

Canon Macintosh PS PPD File v2.70 for Mac OS X=

kind regards
disam