Canon 6255 blur images at the start of the day

[Uniquer]

I have many advance canon 6255/6255/6275 have the same problem that print blur images the first 50 pages around then print normally. If i run clean drum program at the start of the day it prints perfectly from the first page. I already replaced the drum unit and the same problem. I have to run clean drum every day. Any suggestions thank you

[nicknt82]

I have many advance canon 6255/6255/6275 have the same problem that print blur images the first 50 pages around then print normally. If i run clean drum program at the start of the day it prints perfectly from the first page. I already replaced the drum unit and the same problem. I have to run clean drum every day. Any suggestions thank you

Maybe your machine put on high humid environment. check this value of humid sensor on machine and try to move it to another place

[Brian8506]

If it’s cold there the laser could be getting fogged

[smiley]

I have many advance canon 6255/6255/6275 have the same problem that print blur images the first 50 pages around then print normally. If i run clean drum program at the start of the day it prints perfectly from the first page. I already replaced the drum unit and the same problem. I have to run clean drum every day. Any suggestions thank you

Have you turn on drum and paper heater switch at the back of the machine?

[Uniquer]

Have you turn on drum and paper heater switch at the back of the machine?

Yes but no change at all
I have suspects to paper i ll try and give feedback

[smiley]

Try not to turn off the main power switch over night. Just turn off the control panel power button and try to make a copy the next day soo that the paper and drum heater will not turn off.