Canon 4545 J1 finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joe Foe from Buffalo
    Trusted Tech
    • Feb 2009
    • 393
    #1

    [Misc] Canon 4545 J1 finisher

    Problem is not from the machine took the J1 finisher put it on a different machine same problem. Only happens on single copies/prints and is random.
    Watch these videos till the end.
    Canon J1 issue - Google Photos
    Tags: canon 4545 canon j1, finisher, random
    • GIUBOSS
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jul 2013
      • 1382
      #2
      Re: Canon 4545 J1 finisher

      Originally posted by Joe Foe from Buffalo
      Problem is not from the machine took the J1 finisher put it on a different machine same problem. Only happens on single copies/prints and is random.
      Watch these videos till the end.
      Canon J1 issue - Google Photos
      hi, I'm sure you accidentally posted the same post twice. You should open the finisher and check the wear of the rubber rollers, in case replace!

        Comment

        • Joe Foe from Buffalo
          Trusted Tech
          • Feb 2009
          • 393
          #3
          Re: Canon 4545 J1 finisher

          Yes for some reason it kept on telling me to resubmit the post.
          There's no obvious wear and tear and any rubber or parts.
          Originally posted by GIUBOSS
          hi, I'm sure you accidentally posted the same post twice. You should open the finisher and check the wear of the rubber rollers, in case replace!

            Comment

            • GIUBOSS
              Service Manager

              Site Contributor
              1,000+ Posts
              • Jul 2013
              • 1382
              #4
              Re: Canon 4545 J1 finisher

              Originally posted by Joe Foe from Buffalo
              Yes for some reason it kept on telling me to resubmit the post.
              There's no obvious wear and tear and any rubber or parts.
              In my opinion, do a thorough cleaning of the rubber rollers then let's see if it improves ..

                Comment

                • rspicer
                  Technician

                  Site Contributor
                  50+ Posts
                  • Oct 2015
                  • 97
                  #5
                  Re: Canon 4545 J1 finisher

                  I've had similar issues with the J1 and H1 finishers. The fix was to replace the Paddle Drive Assembly. It's accessible from the front of the finisher, so it's not too difficult to replace.

                    Comment

                    • Joe Foe from Buffalo
                      Trusted Tech
                      • Feb 2009
                      • 393
                      #6
                      Re: Canon 4545 J1 finisher

                      Thank you.. That's a possible fix. I've already cleaned everything nothing looks worn. We're considering I'm buying another machine used with the finisher from Canon. Start swapping parts without taking any more guesses on new parts or have one without a finisher in our showroom. I like to look in the manual doesn't look easy to take out though.
                      Originally posted by rspicer
                      I've had similar issues with the J1 and H1 finishers. The fix was to replace the Paddle Drive Assembly. It's accessible from the front of the finisher, so it's not too difficult to replace.

                        Comment

                        • Joe Foe from Buffalo
                          Trusted Tech
                          • Feb 2009
                          • 393
                          #7
                          Re: Canon 4545 J1 finisher

                          Lol Canon tech support recommending changing the processing board on the finisher...=$$$... I don't think so I'm that guess

                            Comment

                            Previous template Next
                            Working...