canon ipf 750 error Printhead PF-04

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mikolaj1312
    Technician
    • Aug 2017
    • 14
    #1

    canon ipf 750 error Printhead PF-04

    I am asking for help from canon ipf 750
    stopped printing blue and black colors and after turning on the cleaning B displayed the error 03800500-2f30 and as we asked one more cleaning after the plotter reset 03800500-2f43, test printouts of the head are attached.
    Attached Files
    Tags: asked, canon, cleaning, error, ipf
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      Re: canon ipf 750 error Printhead PF-04

      Replace the printhead. Confirm that the maintenance cartridge is above 35% and all ink cartridges are above 25% capacity or they may run out of supplies during the printhead purge/installation.

      If it repeats, replace the head management sensor board and printhead as a set.

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Mikolaj1312
          Technician
          • Aug 2017
          • 14
          #3
          Re: canon ipf 750 error Printhead PF-04

          Does the master talk about this element

          Thank you for your help
          Attached Files

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 23008
              #4
              Re: canon ipf 750 error Printhead PF-04

              If you mean me, then yes. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...