ipf 785

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wassem
    Trusted Tech
    • Aug 2012
    • 166
    #1

    ipf 785

    i have a problem in the network socket
    so
    i tried to disassemble the main controller pcb
    there are three parallel flat cables on the board
    two of them are easy to remove
    but the third one is very difficult to remove
    is there any trick in removing it without damaging it
    anyone faced this problem???
    Tags: easy, faced, remove, trick
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22963
      #2
      Re: ipf 785

      Which one? Do you have a photo? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • wassem
          Trusted Tech
          • Aug 2012
          • 166
          #3
          Re: ipf 785

          Originally posted by blackcat4866
          Which one? Do you have a photo? =^..^=
          the lower one

            Comment

            Previous template Next
            Working...