[Jamming] Canon C5030 Jam Type Delay Sensor No UN53

[magesh]

Hi Everyone,

I am a newbie,

My Canon C5030 got Paper Jamming Issue Regularly, when i check in service mode "Jam Type Delay Sensor No UN53",

I also attach the pic of the paper jam message,

I don't no what i need to do, anyone suggest me on this pls....

Regards,
Magesh

[GIUBOSS]

Re: Canon C5030 Jam Type Delay Sensor No UN53

Replace the paper tray1 rubber roller set
(vertical path sensor), also check the clutch that controls the departure of the axis affected by the jam

[magesh]

Re: Canon C5030 Jam Type Delay Sensor No UN53

Thank You so much GIUBOSS ,

Now the jamming issue is gone.

But now when i take printout the edge of the paper is appears dark shades, please assist on this. i also attach the photo herewith.


Thanks,
Magesh

[GIUBOSS]

Re: Canon C5030 Jam Type Delay Sensor No UN53

So in the light of the nose it looks like a black drum and a defective blade