Canon NP 7161 Error E-004

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Saint
    #1

    Canon NP 7161 Error E-004

    Hi therei have a canon NP 7161 has this Error E-004 message flashing when the power is turned on then goes off.It flashes together with the toner light i have already filled the toner.I am guessing that the machine went for long without toner.thus the message. If that is the problem then how does one reset it back to full functionality? Help?CheersSaint
    Tags: 7161, ali, canon, e-10, e004, error, flashes, functionality, help, html, off, one, short, triac
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      You have a problem with the fuser.

        Comment

        • copi_40
          Technician
          • Mar 2006
          • 49
          #3
          I had a E-004 last month caused not by triac (as the manual said).
          The problem was on HVB board (One diode in short and one resistor broken) . From this board you have connection to triac, and toner waste sensor.
          Good luck !

            Comment

            • Saint
              #4
              To manuals4you

              Thank you for that info. I will check it out.
              Saint

                Comment

                • bonkaw
                  #5
                  here this link for Canon NP7161 service manual PRINTER AND SERVICE MANUAL: Canon NP7161-NP7160 Service Manual

                    Comment

                    • tika
                      #6
                      tika

                      Hi therei have a canon NP 7161 has this Error E-102 message flashing when the power is turned on then goes off

                        Comment

                        Previous template Next
                        Working...