Hello,
My Canon C3826i started to print really, really bad.
About 80k A4 bw and and 30k A4 color, about 10k A3 color printed in 10 months.
Drums, belts, rollers etc. was naver replaced. Service mode shows about 50% lifetime left for BK drum and about 80% left for others.
Used only genuine toners and best paper available.
Printed C0M0Y0K60 from Adobe Acrobat and Corel Draw for a full A3 page, got a result attached to this post (scanned at 600 dpi).
Where do I look for? Which part of machine is going bad?
Any help or advice would be appreciated.
Thanks!
My Canon C3826i started to print really, really bad.
About 80k A4 bw and and 30k A4 color, about 10k A3 color printed in 10 months.
Drums, belts, rollers etc. was naver replaced. Service mode shows about 50% lifetime left for BK drum and about 80% left for others.
Used only genuine toners and best paper available.
Printed C0M0Y0K60 from Adobe Acrobat and Corel Draw for a full A3 page, got a result attached to this post (scanned at 600 dpi).
Where do I look for? Which part of machine is going bad?
Any help or advice would be appreciated.
Thanks!
Comment