CANON iR2570Ci (E000020-0081)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gateway.vly@gmail.com
    Technician
    • Dec 2007
    • 52

    #1

    CANON iR2570Ci (E000020-0081)

    Show this error message and go to shutdown
    any know for this error
  • j2980kh
    Technician

    50+ Posts
    • Mar 2009
    • 69

    #2
    E020-0081 : When the background (Drum surface) is read for patch detection, the value of P-SENS-P is lower than

    Comment

    • jarwil
      Technician

      50+ Posts
      • Jun 2009
      • 61

      #3
      other guys are right.

      toner can mist in the machine and cover the patch sensor. sensor then displays incorrect values. that will need to be cleaned.

      also check the life counters of the devs. These can be what cause the toner mist to be in the machine. If they are old they can go off and cause this type of problem.

      Update of system software never hurt either.

      Common fault in these machines. Hope this helps

      Comment

      • reza

        #4
        Originally posted by gateway.vly@gmail.com
        Show this error message and go to shutdown
        any know for this error
        clean patch above drum unit may need new drum and systerm softwear up grade

        Comment

        • Joe Karanja
          Technician
          • Jun 2009
          • 12

          #5
          Jarwil just gave you the correct remedy.i had the same problem sometime back and what i did was to replace the dev units.The lifespun of the devs is 40,000 copies.

          Comment

          Working...